The Harman PF100 Hot Air Pellet Furnace takes pellet fuel heating to its optimum level, operating automatically to give you warm, comfortable temperatures throughout your home. Simply fill the hopper with pellets and set the temperature dial on the wall mounted control to the desired setting. The PF100 will do the rest. If heat is required, the fire will automatically light and burn at the proper rate to produce just the right amount of heat. If heating demand is reduced, the Harman PF100 will reduce the fire. If no heat is required, the fire will go out and light again automatically if more heat is needed. When the fuel in the hopper gets low, the red light on the wall control will blink, telling you to add fuel to the hopper. The PF100’s huge ash pan allows two to three tons of pellets to be burned before emptying. With the patented Harman feeder and burn pot, even high ash pellets can be burned efficiently. The PF100 can be installed as a stand-alone hot air heating system or incorporated into existing hot air systems. A chimney is not required for venting. This direct vent system can also use outside air for combustion. Dual heat exchangers are used to extract maximum heat from the fuel, which will save you money.

In Stock

Harman PF100 Specs:

BTU RANGE: 0-112,000

HEATING CAPACITY: Up To 4,500 sq. ft.*

FUEL: Wood Pellets.

HOPPER CAPACITY: 160lbs.

AUTOMATIC IGNITION: Standard.

SHIPPING WEIGHT: 450lbs.

Pictures of The PF100

---

 

Back to Harman Stove Page